Decorative floors · Arlington, TX
Metallic Epoxy Floors in Arlington, TX
A floor with depth you can almost look into. Metallic epoxy uses pearl pigments worked by hand, so no two floors in Arlington will ever look the same.
- Best for
- Living spaces and showrooms
- Look
- Marble, lava or water
- Finish
- High gloss or satin
- Estimate
- Free, no obligation
What Makes a Metallic Floor Different
Metallic epoxy is a decorative coating that suspends fine metallic or pearlescent powders in a clear, self-leveling epoxy. While the resin is still liquid, the installer moves the pigment with rollers, brushes, sprayers or solvent to create swirls, veins and soft clouds. As the resin levels and cures, the pigment settles at different depths, which is what gives the floor its three-dimensional look.
The style can be bold or restrained. Gray and silver blends read like polished stone in an office or modern living room, while deeper blues, coppers and blacks make a showroom or game room floor the main event. Samples are reviewed before the work, but the final pattern is always unique because it is made by hand.
Because metallic floors are mostly about appearance, the right room matters. They shine indoors on a sound, dry slab with moderate foot traffic. They are less forgiving in a busy garage, where grit and tires show scratches faster.
Where Metallic Epoxy Works Best
A strong fit when
- Living rooms, media rooms and converted garages
- Offices, salons, studios and reception areas
- Car showrooms and display spaces under bright lights
- Anywhere the floor is meant to be a feature
Talk it through first if
- Working garages with heavy grit and tire traffic
- Spaces where a uniform, predictable color is required
- Rooms with untested slab moisture
Looks and Layers
A metallic floor is designed with you before any resin is mixed.
Marble veining
Lighter base tones with fine, darker veins, finished in gloss for a polished stone look.
Lava or cloud
Broad, soft movement and bold color shifts, popular in game rooms and showrooms.
Water ripple
Blues and silvers worked to read like moving water, often used in pool houses and studios.
Protective topcoat
A clear urethane or polyaspartic topcoat adds scratch resistance and keeps the color stable.
What to Know Before Choosing Metallic
Metallic floors reward care. A high-gloss finish shows scratches, dust and footprints more than a flake floor, so they suit rooms where shoes come off or traffic is moderate. A satin topcoat and good entry mats go a long way.
The slab must be flat and sound. Self-leveling metallic epoxy flows to low spots, so humps, ridges and dips show up as pigment pooling. That is why grinding and patching are especially careful on metallic jobs, and why moisture checks matter even more than in a garage.
Light shapes the look. Under daylight a metallic floor shifts across the day; under warm or cool LEDs it changes again. Seeing a sample board in the actual room before deciding is the best way to avoid surprises.
The process
How a Metallic Floor Is Made
Design
Colors, movement and finish chosen from sample boards in your lighting.
Grind flat
The slab is ground, repaired and leveled so pigment does not pool.
Prime and base
A primer and a tinted base coat set the background color.
Metallic pour
Clear epoxy with metallic pigment is poured and worked by hand.
Topcoat
A clear protective topcoat in gloss or satin goes on after the cure.
Cure
The floor cures fully before furniture and regular traffic return.
Pricing
What Drives the Cost of Metallic Epoxy
Metallic work is more labor-intensive than solid-color epoxy. These are the main factors.
Design complexity
Multiple colors and detailed veining take more time and pigment.
Slab flatness
Floors that need leveling or extensive patching add prep.
Square footage
Larger, open floors are more efficient per square foot than small rooms.
Topcoat choice
Urethane or polyaspartic topcoats add a layer and protection.
Prices are not published because every slab is different. The estimate is free and lists each item.
Metallic Floors Around Arlington
Metallic epoxy shows up most often in Arlington media rooms, home offices and converted garages, and in businesses that want a floor customers remember: salons, studios, boutiques and vehicle showrooms. Large windows are common in newer homes, so color stability and glare are part of the design conversation.
Because metallic floors are seen up close, slab flatness gets extra attention. Older slabs with dips near doorways or along former wall lines are ground and patched until the surface is even, so the pigment flows the way it was designed.
Keeping a Metallic Floor Beautiful
Dust mop often with a microfiber pad, damp mop with clean water or a neutral cleaner, and keep mats at doors. Use felt pads under chairs and furniture. Avoid dragging anything heavy across the floor.
If the topcoat dulls in high-traffic paths after years of use, it can be lightly abraded and recoated to restore the shine without disturbing the metallic layer beneath.
Questions
Metallic Epoxy: Common Questions
Can metallic epoxy be used in a garage?
It can, but it is not the most practical choice for a daily-use garage. Grit and tires scratch the gloss faster than a flake floor. If you want metallic in a garage, a tough topcoat and regular cleaning are essential.
Will my floor look exactly like the photos?
No two metallic floors are identical. Samples show the colors and style, but the final pattern is created by hand on your floor.
Is metallic epoxy slippery?
A high-gloss finish can be slick when wet. A satin topcoat or a fine clear grit adds traction where needed.
Does metallic epoxy yellow?
Epoxy can amber in UV light. A UV-stable clear topcoat protects the color in rooms with sun exposure.
How durable is a metallic floor indoors?
With a good topcoat and normal care it holds up well in homes and offices. It shows scratches more readily than flake floors, so mats and felt pads help.
Can metallic go over an existing epoxy floor?
Sometimes, if the existing coating is well bonded. It is abraded and tested first; poorly bonded coatings are removed.
How long does a metallic floor take?
Most rooms take several days because of the design, the pour and the topcoat, plus cure time before furniture returns. The estimate lists the schedule.
Something else on your mind? Call (817) 809-3234, any day from 9 am to 8 pm.
Metallic Epoxy Around Arlington
Available across Arlington and in these nearby areas.
Want a Floor Nobody Else Has?
Share the room, the lighting and the look you like. The design conversation and estimate are free.
Free and no obligation · phones answered 9 am to 8 pm, seven days