Garage floors · Arlington, TX
Garage Floor Coating in Arlington, TX
Turn a dusty, oil-stained garage slab into a bright, textured floor that cleans with a hose and a squeegee. Free estimates across Arlington and nearby cities.
- Best for
- Attached and detached garages
- Typical finish
- Full-flake broadcast
- Topcoat
- UV-stable options
- Estimate
- Free, no obligation
What a Garage Floor Coating Includes
A garage floor coating is a multi-layer resin system bonded to ground concrete. On most Arlington garages that means a pigmented base coat, a full broadcast of colored vinyl flakes into the wet base, and a clear topcoat that locks the flakes in and takes the wear. The result is a sealed floor with a subtle texture that hides dust between cleanings and gives tires and shoes something to grip.
Garages are harder on coatings than almost any room in a house. Tires carry heat, grit and road film in every day. Oil, brake fluid and fertilizer find their way onto the floor. The door opens to direct sun, and the slab itself is often the oldest, most stained concrete on the property. A garage system is designed around all of that, which is why it differs from the thin paint-on products sold in big-box stores.
Most two-car garages are coated in one to two days, depending on the system, the amount of crack repair and the weather. Your estimate spells out the steps and the timing before anything is scheduled.
Is a Coated Garage Floor Right for You?
A strong fit when
- You park in the garage daily and want it easy to clean
- The slab is stained, dusty or spalling at the surface
- You use the garage as a gym, shop or hobby space
- You want the garage to look finished when the door is up
Talk it through first if
- The slab has active moisture problems that have not been tested
- Large cracks are still moving from foundation settlement
- The garage is about to be remodeled or the slab replaced
Garage Systems and Finishes
Most garages land on one of these. The estimate will recommend one for your slab and how you use the space.
Full-flake epoxy with polyaspartic top
The most popular garage build. Epoxy base for thickness and bond, a full flake broadcast for texture and color, and a clear UV-stable topcoat.
Full polyaspartic system
Every layer is polyaspartic. It cures fast, so the garage is back in use sooner, and it resists yellowing in sun-facing garages.
Solid-color epoxy with grit
A clean, uniform color with a fine aggregate in the topcoat for grip. Popular for workshops and home gyms.
Partial-flake or accent finishes
A lighter flake scatter shows more base color for a more modern look, with slightly less dust-hiding texture.
Why Garage Kits Peel and Pro Systems Hold
Most garage coating failures in North Texas follow the same pattern: the floor looks good for a few months, then lifts in patches where the tires rest. The cause is almost always adhesion. Kits rely on an acid etch or a quick scrub, which leaves the hard, smooth top layer of the concrete in place. The coating sits on that layer instead of in the concrete, and hot tires pull it free.
A professional system starts with diamond grinding, which removes the weak surface and opens a profile the resin can soak into. The base coat is thicker, the flakes add body, and the topcoat is chosen for abrasion and sunlight. Together that is several times the film thickness of a one-coat kit, and it is anchored in the slab rather than on top of it.
Edges and joints matter too. A good installer grinds right to the walls, fills or honors control joints, and finishes the stem wall or a short cove so the coating does not end in a ragged line where dirt collects.
The process
How a Garage Floor Is Coated
Clear and protect
The garage is emptied, walls and doors are masked, and the slab is inspected.
Diamond grind
Grinders with dust extraction open the surface and remove old sealers and stains.
Repair
Cracks, pits and spalled edges are filled and ground flush.
Base and broadcast
A pigmented base goes down and flakes are broadcast to refusal while it is wet.
Scrape and topcoat
Loose flakes are scraped and vacuumed, then the clear topcoat is rolled on.
Cure
Foot traffic first, vehicles later, on the schedule set for your system.
Pricing
What Affects the Price of a Garage Coating
Every estimate is written for the specific garage. These are the factors that move the number.
Square footage
Larger floors cost more in total but usually less per square foot.
Slab condition
Heavy cracking, spalling or old coatings add repair and removal time.
System choice
Full polyaspartic and thicker builds cost more than a basic epoxy and flake system.
Moisture
A slab that tests high for moisture may need a vapor-mitigating primer.
Extras
Stem walls, cove bases, steps and joint fillers are priced separately.
Prices are not published because every slab is different. The estimate is free and lists each item.
Garage Floors in Arlington Homes
Arlington's housing runs from compact ranch-style garages on the east side to oversized three-car garages in the southwest, and the coating plan scales with them. Smaller, older garages tend to need more grinding and patching, while newer garages need a builder sealer removed and a decision on how to handle long control joints.
Summer is the hardest season on garage floors here. A car parked after a drive on a 100-degree day brings tires that are far hotter than the air, and a west-facing door adds direct sun on top. That is why most Arlington garage systems finish with a UV-stable topcoat and enough film thickness to resist hot-tire pickup.
Caring for a Coated Garage Floor
Sweep or blow off grit regularly, since sand under tires is what dulls a topcoat over time. Rinse the floor and use a squeegee to push water out the door, or mop with a mild, pH-neutral cleaner. Wipe up oil, brake fluid and battery acid when you see them.
Put a mat or plywood pad under jack stands and kickstands, and use a rubber mat where you park in winter if your tires carry in road film. Avoid dragging metal across the floor. With that routine a flake floor keeps its look for years.
Questions
Garage Floor Coating: Common Questions
How long does a garage floor coating take?
Most two-car garages are finished in one to two days. Fast-curing polyaspartic systems are often done in a day, while epoxy systems may need an extra day between coats or before traffic.
Will hot tires damage a garage coating?
Hot-tire pickup happens when a coating is thin or poorly bonded. A ground slab and a properly built system resist it. That is one of the main reasons to choose a professional system over a kit.
Do I need to empty the garage completely?
Yes. The whole floor needs to be ground and coated in one go, so cars, shelves and storage come out for the work and the cure.
Can a coating go over an old painted or sealed floor?
Old paint and sealers are ground off first. Coating over them would make the new floor only as strong as the old layer underneath.
Is a flake floor slippery when wet?
Full-flake floors have natural texture. If you want more grip, a fine aggregate can be added to the topcoat.
Can the stem wall be coated too?
Yes. Coating the short concrete stem wall around the garage gives a finished look and makes the edges easier to clean.
What flake color hides dirt best?
Medium blends that mix gray, black and white, or tan and brown, hide dust and tire marks best. Very light or very dark blends show more.
Something else on your mind? Call (817) 809-3234, any day from 9 am to 8 pm.
Garage Floor Coating Around Arlington
Available across Arlington and in these nearby areas.
Get a Garage Floor You Want to Show Off
Send the garage size and a few photos, or call. Estimates are free and come with no obligation.
Free and no obligation · phones answered 9 am to 8 pm, seven days